This is my design of a classic tray with a slightly sloped border. I created it to serve as a flat tray or with four feet to elevate it above the surface.
Dimensions
The name of each model follows this format:
LR2178-<width>-<depth>.3mf
Width and Depth
The filenames specify the tray’s inner dimensions in mm. To get the outer dimensions, simply add 8mm to these values.
There is a single model per width and depth. If the specific combination you need is not available, look for a model with these dimensions swapped.
About the Optional Feet
The tray includes alignment holes on the bottom with a diameter of 6mm and a depth of 0.8mm. You can choose to ignore these holes or print four “LR2178-Foot.3mf” models. Secure these feet into the holes with a drop of superglue or epoxy.
