This is my design of a woven basket. It requires no supports for printing.
Dimensions
The filename follows the format:
LR2316-H<height>-D<outer diameter>-B<base diameter>.3mf
Height (H)
The value after the letter H represents the height in millimetres. It’s rounded, so remember to add 0.6mm to get the total height of the final print.
Outer Diameter (D)
The value after the letter D indicates the outer diameter of the basket’s upper rim in millimetres.
Base Diameter (B)
Following the letter B, the base diameter is provided in millimetres.
Base Angle
You’ll also find the base angle for each basket in the catalogue. This angle defines the most extreme overhang of the model. The design limits this angle to 45º, which should be easily printable with any 3D printer. For improved results, consider selecting a model with a steeper angle, around 50º.
